The TADVISION-S standard unit consists of a C-wrap former, a multilayered headbox (TT Headbox-MLT), complete cantilevered framing sections, serpentine TAD outfow type unit with the hot air system, an hydraulically loaded plain press roll (ø 1050 mm) , a Steel Yankee Dryer TT SYD-16FT (4876 mm) working at max 10 bar(g) and an hydraulic Pope reel type TT Reel-H with max reel diameter up to 3000 mm.

An alternative upgraded solution of the TADVISION-S foresees the multilayered headbox (TT Headbox-MLT) with Dilution System, the advanced hydraulic Pope reel type TT Reel-H featuring linear secondary arms, spool drive assist and enhanced automatic reel spools magazine.

The TADVISION-L standard unit consists of a C-wrap former, a multilayered headbox (TT Headbox-MLT) with Dilution System, complete cantilevered framing sections, a serpentine TAD outfow type unit with the hot air system, an hydraulically loaded plain press roll (ø 1200 mm), a Steel Yankee Dryer TT SYD-18FT (5486 mm) working at max 10 bar(g), an hydraulic Pope reel type TT Reel-H+ featuring linear secondary arms, spool drive assist and enhanced automatic reel spools magazine with max reel diameter up to 3000 mm.

Technical Specification

Net sheet width Basis weight on reel Crepe Design speed Max operating speed Max drying capacity Yankee size
TADVISION-S up to 2850 mm /
112 inch
14-45 g/m² 7-20 % 1600 mpm 1500 mpm up to 120 tdp TT SYD-16FT
TADVISION-L up to 5600 mm /
220.5 inch
14-45 g/m² 7-20 % 1600 mpm 1500 mpm up to 240 tdp TT SYD-18FT