钢制杨克缸是在受压的条件下运行。为了观察其工作条件及长期保持高效率运行,拓斯克提供定期专业测试服务,包括:
  • 金属涂层表面检测
  • 冷凝水排除系统检查 扬克缸内部检查
  • 烘缸的超声波及磁测试
  • 相控阵测试
  • 摆动测试
  • 检查后出具报告
  • 生产数据观察/测量(选项)
  • 横幅温度用温度计和红外热成像技术检测(选项)
  • 钢制杨克烘缸直径检查,在高温和室温条件下(选项)
  • 烘缸刮刀系统检查(选项)
  • 暖缸程序检查(选项)
  • 检查钢制扬克缸的蒸汽系统的水质参数(选项)
我们建议对标准尺寸的烘缸每两年进行一次服务,该服务包括:
  • 一名工程师
  • 一名无损检测专家
  • 从烘缸完成冷却程序后开始算,两天时间
  • 服务工作与工厂安全负责人一起协调。
特斯克提供一系列的钢制杨克烘缸专业服务:
  • 6年的服务,包括每两年3次服务
  • 定制服务
  • 振动分析和烘缸平衡服务

COL DX (copy 1)

 

On site Support

This service is available for any type of plant. It includes installation, commissioning, start-up and optimization of the plant. Yankee Hood & Energy Recovery System Optimization guarantees the immediate reduction of energy consumption thanks to the following checks:

  • Check efficiency of the heat recovery system R1.
  • Check the burner’s settings and its combustion, in order to reduce gas consumption and
  • emissions (NOx – Co).
  • Check the settings of the instrumentation.
  • Check the thermal balance (Hood & Air System).

Toscotec’s Service team offers technical support with remote diagnostics tools, in order to speed up service responses and reduce travelling costs to a minimum.

Service Contract

Toscotec recommends entering into a service contract for technical support, inclusive of routine inspections and optimization of settings, under normal operating conditions of the paper machine. These service visits are planned on a six-month or yearly basis, or more frequently, in order to meet the customer’s needs.

Preventive Maintenance

Toscotec provides preventive maintenance services aimed at improving the reliability of papermaking plants. These are customized service programs, according to the type of plant, in order to maximize the efficiency of the job and, at the same time, to minimize operation costs. Toscotec offers technical support/maintenance services locally all over the world, through its service centres in three continents: Europe, USA and China.

Main targets

  • Improve the plant’s operation efficiency and production.
  • Achieve and maintain top performance of the installed equipment.
  • Maximise time between failures.
  • Reduce downtime to a minimum.
  • Install spare parts.

 

 

YANKEE HOOD & ENERGY RECOVERY SYSTEM PROCESS OPTIMIZATION SURVEY

Toscotec’s Site Service also offers an optimization service, made up of tests, analysis and calculation, aimed to evaluate the plant’s performance and identify solutions for the improvement of production, efficiency and reduction of energy consumption and energy costs. Specialized engineers, with sophisticated measurement and control tools, perform this Survey.
During operation of the paper machine, under normal working conditions with stable and continuous production, Toscotec team takes the necessary on site measurements.

This Survey enables the customer to verify the performance and the balance of the Yankee Hood & Air System plant. Yankee Hood are energy intensive systems and need regular checks to deliver optimal performance and guarantee the highest thermal efficiency, with significant reduction of gas and power consumption.

 

HERE FOLLOWS A LIST OF THE CHECKS THAT TOSCOTEC’S TECHNICIANS PERFORM DURING THIS SERVICE:

  • Check the efficiency of the existing heat recovery unit R1, optimize it and minimize energy consumption.
  • Check the burner’s settings and its combustion, in order to reduce gas consumption and emissions (NOx – Co).
  • Check the distance between Yankee dryer and hoods.
  • Check the instrumentation’s settings.
  • Check the balance (Hood & Air System).
  • Check (internal inspection) the status of the air ducts.Check (internal inspection) the status of the burners.

 

Technical Support

Toscotec’s Sales Support & Application Engineers team offers technical and application supporton any type of installations, both on new and existing plants.

Spare Parts

Toscotec takes care of all aspects related to the supply of spare parts: technical support, quotation, orderprocessing and shipment.

Training

Toscotec’s qualified technicians are available to carry out training for final users, with standard and customized programs, according to the specific needs of the trainees. Toscotec agrees with the customer on a training program and selects the technicians in charge of the training accordingly. The training can be arranged both in house on Toscotec’s premises and on site at the paper mill.
In order to guarantee that the customer’s team receive detailed information on safety, process and operation of the system, training is also offered on site during commissioning and start-up of the plant.