The right partner for your tailor-made tissue line.
Toscotec’s tissue machines are designed to optimize your production process and minimize your manufacturing cost. In order to do so, we focus on saving energy and energy efficiency.
Conventional Wet Press Tissue (CWPT).
The AHEAD line is designed to produce high quality conventional tissue of any grade. It is composed of four flexible models, with daily production up to 250 tons, and speeds up to 2,200 mpm.
Through Air Drying technology (TAD).
The TADVISION delivers superior bulk and absorbency. Thanks to the patented design of its drying section, TADVISION has proved to significantly reduce the energy consumption of traditional TAD machines.
The AHEAD Line is made of Toscotec’s Conventional Wet Press Tissue machines. Every AHEAD tissue machine is custom-made.
Toscotec’s TADVISION® Line ensures optimal bulk, softness and absorbency. Toscotec upgraded the design of its TADVISION® Line machine in order to achieve superior bulk, absorbency, and outstanding results in energy consumption.
INGENIA is a new concept tissue machine to produce premium quality structured tissue paper.
TT MBP. The Toscotec Broke Pulper TT MBP is designed to be installed under machine both in tissue, paper and board applications.
TT RS. The Toscotec Rotating Screen TT RS is used in recycled paper stock preparation plants to de-water the coarse rejects coming from upstream cleaning equipment.
TT RG. For the proper performance of a continuous pulper working with recycled paper (Toscotec Low Density Pulper), a cleaning unit such as the ragger TT RG is required to be installed.
TT TM. Optimized to work with heavily contaminated recycled paper or with rewinder trims, the Toscotec Low Density Pulper TT TM is designed to perform an extremely efficient and low energy slushing in continuous mode and to remove rejects without breaking them.
TT VP. Suitable to work both with virgin pulp, broke, recycled paper and non-wood fibers, the Toscotec Medium Density pulper TT VP is designed to perform an extremely efficient and low energy slushing in discontinuous mode.
TT TMC. The Toscotec Turboseparator TT TMC is installed in recycled paper stock preparation lines as primary screen to treat the accept stream of the Toscotec Low Density Pulper.
TT VS-3. The Toscotec Vortiscreen TT VS-3 can be installed as the only coarse screen in converting broke lines or as the last tail screening stage for the treatment of the rejects coming from drilled Toscotec Superscreens in recycled paper processing lines.
TT VS-1. The Toscotec Vortiscreen TT VS-1 is used in recycled paper stock preparation plants mainly for the detrashing of the continuous TM Pulpers and as a dumping machine of high consistency batch pulpers.
TT SS. The Toscotec Superscreen TT SS is a horizontal screen with basket and rotor designed to be installed as a coarse or fine screen in recycled paper stock preparation plants. It is optimal to treat stock up to a working consistency of 5%.
TT HDC. Engineered to work both with virgin pulp and recycled paper, the Toscotec High Density Cleaner TT HDC is designed to reliably remove heavier than fiber contaminants, suspended in consistencies up to 6%, directly after the pulper.
TT CA. The Toscotec Thickening Screw TT CA is an inclined screw thickener; it can be configured as a Single Unit or as Combined Units (up to 3 Units on a single stand and with only one feeding headbox) for higher capacity and reduced footprint.
TT CW. The Toscotec Wire Washer TT CW is used to obtain an efficient removal of ashes, inks, glues, and fines by means of low consistency stock washing and consequent thickening.
TT SAF. Toscotec Short Approach Flow TT SAF, patented by Toscotec since 2012, allows every mill, new or existing one, to reduce energy consumptions and installation space, without compromises in terms of performances.
TT V. The Toscotec Vibrating Screen TT V can be used as final stage for rejects de-watering after other screens such as vortiscreens, superscreens and pressure screens.
TT AFS. The Toscotec Pressure Screen TT AFS is designed to be installed in the approach flow system as final protection of the headbox.
Dust Removal System, Mist Removal System, Heating & Ventilation System
Quality rolls for rewinder operation
Toscotec customizes the design of its TT Hood based on the customer’s needs and the overall drying configuration of the tissue machine, including the Steel Yankee Dryer.
As an auxiliary system of the Steel Yankee Dryer, Toscotec’s Steam and Condensate System is optimized to operate in association with TT SYD to allow it to achieve its maximum drying capacity.
Toscotec is both the inventor and the leading supplier of Steel Yankee Dryers worldwide.
Paper machine press section represent a key area for rebuilds to improve quality of the paper and energy savings.
TT Headbox delivers optimal sheet formation, because its design is custom-made based on the specific product needs of the customer. It operates at a high consistency, thereby reducing energy consumption.
Toscotec’s TADVISION® Air System is composed of two hoods, a lower blowing hood and an upper suction hood, installed below and above the TAD Drum section of the TADVISION® machine.
TADVISION® features a unique outflow serpentine design in its TAD section, which is composed of a multiple number of TAD drums (configuration according to production needs).
Section Quality rolls for rewinder operation.
The perfect tool for new machines or to improve the efficiency and safety of an existing line.
Surface improvement solutions for a stronger paper
The most famous well-proven TT SteelDryer and drive concepts.
Tailored press technologies, inlcuding Shoe Press, according to the applications.
State-of-the-art drainage equipment is properly configured on a Toscotec fourdrinier to reach the best quality results.
Toscotec’s headbox line can satisfy all customer needs in terms of production, quality and specific application.